Elastic Silver Reflective Tape Iron

Easy to apply. DIY Iron On to Clothes,Before iron on , remove the blue protect film first.

Material: BPU ( Stretchable elastic material , very good fit elastic fabric)

Brightness > 420 cd/(lx/㎡); Home Wash Cycles :Up to 50 cycles @60°C (140°F)

EN ISO 20471, ANSI/ISEA 107-2015 Certified Level

Suitable for the hot pressing of the safety clothing of whole polyester, cloth, weaving and elastic fabric.

Attachment Type: Iron On Color: Normal is Gray color, when reflective it is bright white(Silver). Material: BPU ( Elastic material,very good fit elastic fabric) Brightness > 420 cd/(lx/㎡) Home Wash Cycles :Up to 50 cycles @60°C (140°F), depends on the condition of substrates and heat transfer operations.Before ironing , remove the blue protect film first. Good elasticity, suitable to be applied on all kinds of stretchable fabrics. Suitable for the hot pressing of the safety clothing of whole polyester, cloth, weaving and elastic fabric. Care instructions: use neutral detergent in hand wash.Do not pre-soaking. hot water wash is allowed around 40℃, Do not use detergent that contains bleach,acid or alkali. Precautions: 1, this heat transfer film is not suitable for nylons or any other water-repellent substrates. 2, this heat transfer film is not suitable for mesh fabric with holes,heat transfer film on holes without substrates is with low adhesive strength, and easily damaged in the wash process or in daily uses. 3, the lamination temperature, time,speed and pressure listed about shall we used a guide. for each fabric, we recommend that substrates always be tested prior to production, ensure that they meet your specific needs, and to assure adequate adhesion and physical performance. 4, after heating,allow heat transfer film to cool to room temperature,remove the reflective liner by lifting one corner and pulling ( 180°angle) in a continuous,smooth manner. 5, Do not exceed lamination temperatures listed above because the clear polyethylene liner may become difficult to remove and affect the physical performance. 6, Heat press 140℃ ~ 160℃,dwell time 8~20 second with plane pressure >0.5kg/c㎡

Returns Accepted for this item if it's within 30 Days