Alloy 5000t 3/32" Tig Rods For Cast Iron

·         Excellent for welding all cast irons

·         Welds copper to steel and stainless steel

·         Non-Carcinogenic

·         No nickel

Suggested settings for Cast Iron Repair:

DC Negative

100 Amps

100% Argon Shielding Gas

2% Thoriated Tungsten with pointed tip

General directions for use on cast iron repair:

For best results use a sparing amount of acetone on a rag and wipe the rod prior to use. If thickness permits, you can “V” out the crack to expose the clean metal. Some TIG welders like to make a quick pass or 2 over the crack to give it a little preheat but also to burn out any grease or oil. Make a puddle with the tip and add filler by a dipping the wire in the puddle. When you complete the weld always leave the weld with a deposit of filler. If the process is not successful, use a magnet to verify that the casting is iron.

BD-5000T-094-POP

Blue Demon 5000T 3/32in x 18in pop pack TIG rod for cast iron repair (8 rods)

lb

652426009275

.38 lbs

inches

19 1/4in

1in

1in