Rhinestone Crown Iron
-on
USD $6.00
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Stunning Silver & Clear Crown Rhinestone Iron-on. Perfect for any apparel or fabric item such as tshirts, hoodies,jackets, totes bags. Easy iron on.
Turn Iron on High or Wool setting. DO NOT USE STEAM
1. Lay out and smooth your garment or fabric. Place a piece of cardboard or other hard flat surface (or non stick pressing cloth) on the inside of your item between the front and back, so the melted glue will not glue the front and back of your fabric together.
2. Peel off white backing and place transfer sticky side down onto fabric and position the design. Use tweezers to fix any overturned or out of place stones.
3. Place iron on top of clear plastic cover sheet and hold for a minimum of 45 - 60 seconds. Do not move or wiggle around the iron. If the design is larger than iron, pick up the iron and place it down on the next section until glue has melted.
4. Let the plastic cool for approximately 1 minute. There should be a slight ripple or bubbling in the plastic. Slowly lift plastic off one corner. If there are crystals still sticking to the clear plastic, you have missed a section, OR you haven’t applied the iron long enough to melt all the glue. If this is the case, place plastic back down and heat with iron again until all glue is melted.
When cooled, peel off outer plastic and you’re done!
Additional Tips: If design has larger crystals (size 16ss or 20ss), you'll need to heat that area longer to melt the glue. Approximately 75 - 90 seconds.
Turn garment inside out when laundering to help preserve design.
Shipped with USPS First Class.
Turn Iron on High or Wool setting. DO NOT USE STEAM
1. Lay out and smooth your garment or fabric. Place a piece of cardboard or other hard flat surface (or non stick pressing cloth) on the inside of your item between the front and back, so the melted glue will not glue the front and back of your fabric together.
2. Peel off white backing and place transfer sticky side down onto fabric and position the design. Use tweezers to fix any overturned or out of place stones.
3. Place iron on top of clear plastic cover sheet and hold for a minimum of 45 - 60 seconds. Do not move or wiggle around the iron. If the design is larger than iron, pick up the iron and place it down on the next section until glue has melted.
4. Let the plastic cool for approximately 1 minute. There should be a slight ripple or bubbling in the plastic. Slowly lift plastic off one corner. If there are crystals still sticking to the clear plastic, you have missed a section, OR you haven’t applied the iron long enough to melt all the glue. If this is the case, place plastic back down and heat with iron again until all glue is melted.
When cooled, peel off outer plastic and you’re done!
Additional Tips: If design has larger crystals (size 16ss or 20ss), you'll need to heat that area longer to melt the glue. Approximately 75 - 90 seconds.
Turn garment inside out when laundering to help preserve design.
Shipped with USPS First Class.
Price type
IN STOCK
OUT STOCK
.
